Switching Switch Groups - Aastra 400 Serie Manual Del Sistema

Prestaciones
9. 7. 10

Switching switch groups

Switch groups defined in the system configuration can be selected by user A using
switch contacts or a function code from the terminal. The switchover can also be
carried out automatically using time-controlled functions in the System Configura-
tion (see "Time-controlled functions", página
N° de grupo
de conmuta-
ción
01
02
. .
.
20
Fig. 234 Switching switch groups
Detailed Description
Tab. 334 Switching switch groups
Interface Operating sequence / signalling on the terminal
A • The user obtains an acknowledgement tone when
switching On / Off.
• Terminals connected to the S-bus cannot display
the status of switching groups 2 to 20.
• System phones: The switching status is displayed
by the status of the LED or the corresponding sym-
bol on the display for the function key configured
accordingly.
Tip:
Identify the significance of the switching states on the labels of the termi-
nals.
522
Autorización Cambio a pos. 1, 2, 3
de usuario por grupo de
Sí / No conmutación
Entradas HW
Teléfono: Tecla F
General:
*8501 1 D
*8501 2 N
*8501 3 Fin de
semana
Teléfono: Tecla F
General:
*85xx 1 D
*85xx 2 N
*85xx 3 Fin de
semana
539)
Mostrar sólo si se ha
definido una tecla de
función (tecla F)
(recomendado).
Scope
Possible interfaces:
The switch groups are operated locally on
the system.
Funciones y prestaciones del sistema a partir de R2.1
Estado de la
pantalla
LED en el
teléfono del
sistema
syd-0370/1.2 – R2.1 – 07.2012