Prestaciones
Tab. 216 E-mail notification
Parameter
Notification of a new voice mes-
sage
Attach voice message
Additional destinations (email
addresses)
Tab. 217 Mailbox recording capacity
Parameter
Max. capacity
Capacity used
Tab. 218 Greetings
Parameter
Number of personal greetings
Active greeting
Max. recording time per gree-
ting
Codec greetings
Recording after global greeting
enabled
Greeting name
436
Value range
Remarks
Yes
/
No
Newly recorded voice messages generate an e-mail to
the user's email address and any additional email desti-
nations that may have been entered. The parameter is
configurable only if the user has a valid e-mail address
configured.
Yes
/
No
An audio file with the recorded voice message is also
sent as an e-mail attachment.
Note: Audio files are only sent along too if the codec is
set to G.711.
<E-mail address 1,
E-mail notifications are sent to the user's e-mail address
E-mail
as standard. If the e-mail notifications are to be sent to
address 2...>
other destinations, enter the e-mail addresses here.
Separate the individual e-mail addresses with a comma.
Value range
Remarks
<0..3600> sec.
Total recording time available for this mailbox (incl. per-
sonal greetings).
<0..3600> sec.
Status display
Value range
Remarks
<0..3>
The global greeting (setting = 0) is automatically activa-
ted if no personal greetings are recorded. If no global
greeting is available, the greeting is automatically taken
over by the audio guide.
<0..3>
Greeting 1, 2 or 3 can be selected as the active greeting,
where permitted. The greeting 0 corresponds to the glo-
bal greeting.
<0..300> sec.
Applies only to personal greetings. For global greetings
the maximum length is defined in the file management.
<G.711 (low com-
Choice of compression method:
pression)
/
G.729
G.711 = high call quality, requires more memory
(high compres-
G.729 = lower call quality, requires less memory
sion)>
Yes
/
No
Allows the caller to leave a voice message after the glo-
bal greeting.
<Name>
Funciones y prestaciones del sistema a partir de R2.1
syd-0370/1.2 – R2.1 – 07.2012