Alarm Handling - Aastra 400 Serie Manual Del Sistema

Parameter
Default ESME
Password
Response time
Besides these settings the authorization to send short messages to an ESME can be
enabled or disabled for each user:
Send SMS = Yes / No
A web-based configuration is loaded into the browser via the AMS Shell for the
configuration of the ESME.
The use of the SMPP protocol to integrate an SMS server is subject to a licence.
Warning:
In the case of applications designed for emergency calls and personal
protection such as fire alarm systems, nurse light paging systems, alarm
systems against attacks or hold-ups, etc., text messages may only be used
to complement certified alarm systems. Text message alarming is only
compatible with emergency operation if the communication server and
the external alarm source are equipped with a UPS.
9. 10. 3. 2

Alarm handling

External alarms from an alarm server are not handled by the SMSC but sent directly
to the corresponding destination phone. No more alarms can be sent to the corres-
ponding phone if the storage location is full. The alarm server is responsible for en-
suring that alarms are delivered.
Other Properties and System Limits:
• Alarms take priority over messages.
• Max. length of alarm message texts is 160 characters.
• A maximum of 16 alarms can be stored for each user. No more alarms can be de-
livered after that.
• Alarms are always routed to the destination defined in the send command; Call
Forwarding Unconditional and Call Forwarding on No Reply operations have no
effect.
• Several alarm sources can be connected to each communication server.
Funciones y prestaciones del sistema a partir de R2.1
syd-0370/1.2 – R2.1 – 07.2012
Remarks
Messages without a destination address are sent to the default ESME.
The password is checked every time a connection is set up between SMSC
and ESME (minimum length = 4).
Max. amount of time the SMSC waits for an answer from the ESME [0...5
minutes]
(default setting = Yes)
Prestaciones
561