Standard Accessories; Optional Accessories; General Conditions Of Use; Switching On The Machine - Corghi EYE LIGHT Manual De Uso

STANDARD ACCESSORIES

The following parts are supplied together with the
machine.
Weight pliers
Calliper for wheel width measurement
Sliding flange holder kit
Calibration weight
Wheel balancer power supply cable
Monitor power supply cable
Kit 4 cones
Wheel fixing cap protection
Wheel spacer
Wheel fixing cap
C VERSION
C hub
C locking device
C hub key

OPTIONAL ACCESSORIES

Please refer to relevant accessories catalogue.
GENERAL CONDITIONS OF
USE
The equipment is intended for professional
use only.
WARNING
Only one operator at a time can work with the
machine.
The wheel balancers described in this manual
must be used exclusively to measure the extent
and position of car wheel unbalances, within the
limits specified in the Technical specification sec-
tion. Furthermore, models equipped with motors
must be provided with a suitable guard, fitted with
a safety device, which must be lowered during the
spin operation.
WARNING
Any use of the machine other than the de-
scribed use is to be considered as improper
and unreasonable.
52
CAUTION
Do not start the machine without the wheel
locking equipment.
WARNING
Do not use the machine without the guard and
do not tamper with the safety device.
CAUTION
Do not clean or wash the wheels mounted on the
machine with compressed air or jets of water.
WARNING
It is advisable to use only original tools for
working.
WARNING
Get to know your machine: The best way to
prevent accidents and obtain top performance
from the machine is to ensure that all operators
know how the machine works.
Learn the set up of all controls and their func-
tions. Accurately check for correct functioning
of every machine control device. To prevent
accidents and personal injury, all the equipment
must be correctly installed, correctly operated
and correctly serviced.
SWITCHING ON THE
MACHINE
Connect the power supply cable (A, Fig. 11a)
supplied with the machine from the external
electrical panel located on the rear side of the
wheel balancer body to the mains.
EYE LIGHT - Operator's manual