Section D2: Routine Care And Maintenance - Nanosonics trophon EPR Manual De Usuario

4. Follow the setup instructions included in the box for loading the label roll into the
trophon Printer.
NOTE: Keep the label roll holders in the "unlock" position. Please note the orientation of the
label roll holders in Figure 17, as they can be rotated. Incorrect orientation will prevent
correct loading of the label roll into the trophon Printer
D1.5 trophon Printer - Instructions for Use
1. Once the trophon Printer is connected to the trophon EPR via the cable provided and
powered on, the printer will be automatically detected.
2. It is recommended that a Test Print is completed as the initial printed label before
trophon EPR High-Level Disinfection labels are printed (Refer to D1.6).
3. Printed label records will be available at the completion of each high- level disinfection
cycle completed by the trophon EPR.
NOTE: Records of previous high-level disinfection cycles can be re-printed from the trophon
printer by selecting MENU  PRINTER  REPRINT LAST RECORD.
D1.6 trophon Printer - Test Print
1. Check the printer connection on the trophon EPR LCD screen:
 Select MENU using the soft key button
 Select PRINTER
 Select TEST PRINT
2. The printer will print and cut a sample label, confirming correct connection.
D1.7 trophon Printer – Number of Label Copies
Select the number of printed label record copies (1- 4) printed for each disinfection cycle.
1. Use the MENU soft key and select PRINTER
2. Select NUMBER OF LABELS
3. Select desired number of printed copies (1 – 4) per disinfection cycle

SECTION D2: ROUTINE CARE AND MAINTENANCE

D2.1 Replacing trophon Printer Label Roll
The trophon EPR will display notification when the label roll requires replacement via an on
screen LCD message: PRINTER OUT OF PAPER
Follow the setup instructions included in the printer box to load label roll.
D2.2 Cleaning the trophon Printer
1. Turn off the printer and unplug from the power socket before cleaning.
2. To clean the outside of the device, wipe with a soft damp cloth. Do NOT submerge the
device, or pour liquids over, or spray liquids onto the printer.
3. Use warm mild soapy solution to clean the outside covers of the printer, taking care not
to have liquid come in contact with the power socket, the interior of the trophon Printer
or label roll.
4.
Clean the printer head when replacing the label roll using a soft cloth with ethanol.
Refer to Figure 17 for printer head location.
®
trophon EPR User Manual – N00020
.
L00034 1.0 03/2014
29