Nanosonics trophon EPR Manual De Usuario página 12

A4.4 Basic Settings
Date and Time
1. Press the soft key button underneath MENU on the screen
2. Using the soft key buttons under the LCD:
 Scroll to SETUP using the buttons under the arrows and press OK
 Scroll to SET DATE AND TIME using the buttons under the arrows
 Set the date and time by using the button under NEXT to move through each set
point and the arrows to scroll to the desired date and time
 Once each set point is set press OK
 The screen will now revert back to the menu screen
 To change date and time format select SETUP using the buttons under the arrows
and press OK
 Scroll to CHANGE DATE FORMAT or CHANGE TIME FORMAT using the buttons under
the arrows
 Press OK once complete
 The screen will now revert back to the menu screen.
Language
1. Press the soft key button underneath MENU on the screen
2. Using the soft key buttons under the LCD:
 Scroll to SETUP using the buttons under the arrows and press OK
 Scroll to LANGUAGE using the buttons under the arrows and press OK
 Scroll to the desired language using the buttons under the arrows and press OK
 The screen will now revert back to the menu screen
Alarm Settings
1. Press the soft key button underneath MENU on the screen
2. Using the soft key buttons under the LCD:
 Scroll to SETUP using the buttons under the arrows and press OK
 Scroll to ALARM SETTINGS using the buttons under the arrows and press OK
 Set the alarm volume by pressing the up & down buttons to set the volume on high
or low. Press Ok to confirm selection.
 Scroll to ALARM REPEAT using the buttons under the arrows and press OK
 Set the alarm to repeat by pressing the up & down buttons to turn on or off the
alarm repeat. Press OK to confirm selection
 If alarm repeat is enabled, the alarm will repeat every minute for the following
situations:
a. The probe is left in the device
b. Error message is displayed and requires a response
®
trophon EPR User Manual – N00020 L00034 1.0 03/2014
12