Operating Parameters - salmson CC HVAC Instrucciones De Instalación Y Funcionamiento

ENGLISH
Menu Display
No.
visible to
Users 1 and above:
Call-up Users 2 and above:
by:
Service:
4.3 Parameter set-up menus
4.3.1 Control mode Installation
4.3.2

Operating parameters

4.3.2.1 1. setpoint
4.3.2.2 Limit values
Description
*
**
***
* (page 5 – SMS call numbers)
Input of 4 possible call numbers (1-4) and
the number of the SMS centre of the pro-
vider (call number 5); selection with keys
+/-
* (page 1)
Call-up of the system, operating parame-
ters, controller parameters and pump
parameters menus (Telemetry)
* (page 2)
Call-up of the FC, time of day, display set-
tings and SMS settings menus
* Determination of the control mode of the
installation
selection with keys +/-
switching all drives On and Off
* Call-up of the menus for setpoint, limit
value and sensor settings
* Corresponds to 3.
* Only with p-c control mode:
Input of permitted limit values of the con-
trolled variable.
A time delay before triggering the alarm
can be entered for these limit values.
51
Setting parameters/
functions
adjustable by
Users 1 and above: *
Users 2 and above: **
Service: ***
Call number 1-5 **
[num., 16 digits]
none
none
Controller mode **
Drives
none
Limit values **
GW **
Hyst
t [s] **
Hyst
Factory
setting
installation-
specific
-
-
installation-
specific
Drives Off
-
installation-
specific