Stahlwille Manoskop 730D Serie Instrucciones De Servicio página 49

EN
Technical description
1
2
5
1 Tool
2 Tool mounting
3 Display and buttons
4 Battery compartment
5 PC connection socket
The 730D torque wrench is an adjustable, indicating
and clicking torque wrench with an audible and
perceptible cut-out signal.
Characteristics of the torque wrench:

Electronically controlled safety cut-out mechanism.

Fast and precise adjustment of the cut-out values
via buttons.

The set value is electronically saved.

An automatic button lock prevents unintentional
adjustment.

Pre-settings can be secured via a PIN code.

Overload protection via an acoustic and optical
warning signal.

Automatic indication of the next calibration date.

Simple calibration and poss. adjustment with tester
No 7707 W without disassembly.

Once the torque wrench has been relieved, it is
immediately ready to function again.

Clockwise and counter clockwise tightening is
possible.

The display function also works in the case of
counter clockwise torques.

7500 bolting data can be saved, read out via a
USB interface and transferred to a PC for further
processing.

The torque wrench has a QuickRelease safety
locking mechanism for simple locking and release
of socket tools.

Safe handling thanks to an ergonomically shaped
handle. The correct gripping position can be seen
and felt.

Various units of measurement can be set.

Extensions for special socket tools can be entered
easily.

Visible, perceptible and audible warning signals are
present.
3
4
The torque wrench is available in seven different
sizes. See page 24.
The torque wrench can be equipped with various
insert tools. To achieve this, the head of the wrench is
equipped with a square socket with a double-sided
detent bore and an insertion groove. This enables
controlled counter clockwise tightening in cut-out
mode.
Identification
The torque wrench is identified with a serial number.
This is stamped in on the side of the torque wrench
tube. 
The serial number is additionally stored in the
software. It is transferred to the PC when the
measured values are read out.
Accuracy
The measuring range is 10 % bis 100 % of the
nominal value.
The display deviation of the relevant measured value
is ± 2 %. 
The torque wrench corresponds to DIN EN ISO 6789.
Each torque wrench is supplied with a factory
calibration certificate.
23