Stahlwille Manoskop 730D Serie Instrucciones De Servicio página 42

EN
Entering/changing the PIN code
Attentio n
Limited use of the torque wrench without
the correct PIN code.

Store the PIN code in a safe location.

If you have forgotten the PIN code, contact
STAHLWILLE.

In delivery condition, the torque wrench PIN
code is set to "0000".
The PIN code can be set or changed in the "Switch on
key lock" menu.

Call up the "Switch on key lock" menu.

Press the F button until the "Key" symbol is
displayed.
"On" or "OFF" flashes.

To switch on the key lock, use the arrow buttons to
select "On".

Press the F button.
The first digit of the four-digit PIN code flashes.

Use the arrow buttons to select a digit between 0
and 9.

Press the F button.
The second digit of the four-digit PIN code flashes.

To set the remaining digits of the PIN code,
proceed as described above.

After entering the last digit of the PIN code, press
the F or OK button.
The PIN code is now saved.

Note the new PIN code.
Proceed as follows to change an existing PIN code:

Call up the "Switch on key lock" menu.

Keep pressing the F button until the "Key" symbol
is displayed.
"On" of "Off" flashes.

Press the F button.
The first digit of the four-digit PIN code flashes.

Use the arrow keys to select the first digit of the old
PIN codes.

Press the F button.
The second digit of the four-digit PIN code flashes.

Repeat the procedure for changing the digits of the
PIN code for the remaining digits.

Press the F or OK button after entering the last
digit of the PIN code.
You can now enter the new PIN code directly.
16

Enter the old PIN code.

Confirm the old PIN code.

Enter the desired new PIN code in the same way.
The PIN code has been changed.
Entering the PIN code
No settings can be changed in the torque wrench
menu without entering the correct PIN code.

The PIN code is only requested when the key
lock has been switched on and a PIN code has
been set.

Switch on the torque wrench.

Press the OK button.

Wait until taring has been completed.

Press the F button twice.
The first digit of the four-digit PIN code flashes.

If you do not make an entry within approx. three
seconds after pressing the F button, the torque
wrench switches back to its basic status.

Use the arrow buttons to select the first digit of your
PIN code.

Press the F button.

The second digit of the four-digit PIN code flashes.

To set the remaining digits of the PIN code,
proceed as described above.

After entering the last digit of the PIN code, press
the F or OK button.

Settings can now be carried out in the menu.