Stahlwille Manoskop 730D Serie Instrucciones De Servicio página 44

EN

To set the remaining digits of the bolting application
number, proceed as described above.

Press the F button.

To work with extension correction, use the arrow
buttons to select "On".

Press the F button.

Use the arrow buttons to set the extension.

To accept the setting and return to the basic status,
press the OK button.
18
Using the torque wrench
Taring the torque wrench
Before starting the bolting process with the torque
wrench, the torque wrench must be tared as described
on page 10.

Slight movements or the application of strain on
the torque wrench during the taring process
lead to measurement errors.
Actuating the torque wrench
WAR NI NG
Risk of injury due to incorrectly
mounted socket tools.

Make sure that the socket tools are secured
against pulling off by engaging the retaining pin.
WAR NI NG
Risk of injury due to incorrectly
set torque values.

Make sure that the torque value is set correctly.
A tt e n t ion
Damage to the torque wrench possible.

Make sure that the torque wrench is not
overloaded.

Never exceed the maximum torque which can be
set (see laser lettering on the housing tube).

Only actuate the torque wrench using the handle.

Grip the handle centrally.

Tighten tangential to the swiveling radius and at an
angle to the tightening axis.