Unbalance Visualisation In Grammes/Ounces; Rounding-Off; Wheel Spin (Version Without Guard) - Corghi ProLine 640 Manual De Uso

- Press the
previous value and set the machine for
distance data entry.
- Bring the distance measuring arm into
contact with the inner side of the rim
(Fig.10).
- Read the wheel/body distance on the
rule.
- Modify the displayed distance value by
pressing the
the read number is set.
- On completion, press
the unbalance values recalculated on the
basis of the new dimensions, or
perform a wheel spin.
UNBALANCE
VISUALISATION IN
GRAMMES/OUNCES
The setting for the visualisation of the
unbalance values in grammes or ounces is
made by keeping the key
for about five seconds.

ROUNDING-OFF

When started up, the machine is set to dis-
play the unbalance values at five-gramme
increments, i.e. rounded to the nearest
multiple of five (or quarters of an ounce if
visualised in ounces).
In this condition, the first four grams of un-
balance are not displayed since an appro-
priate threshold, indicated by illumination
50
button to confirm the
buttons until
to display
pressed
of the
activated.
The key can be pressed to eliminate
the threshold (the illuminated indication
"x5"; "oz/4" goes out) and the unbalance
values will be displayed gram by gram (or
in tenths of an ounce if display in ounces
is active).
Pressing the key consecutively allows the
user to set one display mode or the other.
WHEEL SPIN
(VERSION WITHOUT
to
Press button
WARNING
During machine use, personnel may not
be present in the area enclosed by the
sectioning in Fig. 5a.
WARNING
If the wheel continues spinning without
stopping due to a machine malfunction,
switch the machine off from the main
switch or disconnect the plug from the
power board (emergency stop) and wait
until the wheel stops before lifting the
guard.
LED on the display panel, is
GUARD)
on the screen.
User manual ProLine 640