Limited Warranty - Welch Allyn ABPM 7100 Instrucciones De Uso

35 - Troubleshooting
Error symptom Possible cause
Severe error caused by accumulated
Err 10
pressure outside the measurement
+
process.
Continuous alarm until a
These error messages all show a severe
button is pressed.
error in the program code.
The analysis unit does
not react to data Data transmission cable not correctly
transmission but the inserted in the PC. (also refer to Err 4)
display shows "co".
The ABPM 7100
measures every two Log 9 is set in the ABPM 7100.
minutes.
The desired log cannot
The last patient's measurement values are
be set with the button
still contained in the memory.
combination.
The battery packs or batteries were
incorrectly inserted.
The ABP Monitor cannot
Power pack or battery voltage too low.
be switched on.
Defective display.
An error occurs during The cuff size is not suitable for the
the first measurement. patient's arm circumference.
Remedy
Send the device to your specialist for inspection
and repair immediately or directly to your Welch
Allyn specialist.
Check whether the 9-pin plug of the data
transmission cable is securely seated in the
device's interface socket. (also refer to Err 4)
Set log 1 or 2.
Delete the data in the ABP Monitor but ensure
that the data was stored first.
Reinsert either power packs or batteries and
ensure correct polarity.
Replace the power packs or batteries.
Send the device to your specialist for repair or
directly to your Welch Allyn specialist.
Measure the patient's arm circumference and
compare this with the imprint on the cuff. You
may require a different cuff size.

Limited Warranty

Welch Allyn warrants the product to be free of defects in material and workmanship and to perform in accordance with
manufacturer's specifications for the period of one year from the date of purchase from Welch Allyn or its authorized
distributors or agents.
The warranty period shall start on the date of purchase. The date of purchase is: 1) the invoiced ship date if the device
was purchased directly from Welch Allyn, 2) the date specified during product registration, 3) the date of purchase of
the product from a Welch Allyn authorized distributor as documented from a receipt from said distributor.
This warranty does not cover damage caused by: 1) handling during shipping, 2) use or maintenance contrary to
labeled instructions, 3) alteration or repair by anyone not authorized by Welch Allyn, and 4) accidents.
The product warranty is also subject to the following terms and limitations: Accessories are not covered by the warranty.
Refer to the instructions for use provided with individual accessories for warranty information.
Shipping cost to return a device to a Welch Allyn Service center is not included.
A service notification number must be obtained from Welch Allyn prior to returning any products or accessories to
Welch Allyn's designated service centers for repair. To obtain a service notification number, contact Welch Allyn
Technical Support.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILTY AND FITNESS FOR A PARTICULAR
PURPOSE. WELCH ALLYN'S OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIR OR
REPLACEMENT OF PRODUCTS CONTAINING A DEFECT. WELCH ALLYN IS NOT RESPONSIBLE FOR ANY
INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM A PRODUCT DEFECT COVERED BY THE
WARRANTY.
Limited Warranty - 36