Ending The Program Prematurely; Program Is Ended - MELAG Vacuclave 550 Manual De Uso

8 Sterilization

Ending the program prematurely

You can end the program prematurely. If you abort the program before the end of the drying phase, the load is not com-
pletely dried and should be used immediately.
The following must be fulfilled or present:
ü The drying phase has been reached.
1.
To end the program prematurely, press END.
2. Confirm the termination of the drying process with YES.
Ê
The program will be aborted prematurely.
See also:
▪ Program options [} page 44]

Program is ended

PLEASE NOTE
If the program has been carried out successfully, a corresponding message appears on the display
and the status LED below the display illuminates green.
If the display indicates that the program was not successful or the LED does not illuminate green, the
n
program must be repeated.
1. Before opening the door, you can view further values for the
program that has just been completed (e.g. the plateau time or
the conductivity) by pressing the magnifying glass symbol.
Press OPEN DOOR to remove the load.
2.
With enabled Authentication at Reprocessing program
3.
end, authenticate by entering a PIN.
32