Inserting The Bobbin; Threading The Machine; Threading The Upper Thread - Texi Ballerina Manual De Operación

TEXI Ballerina manual operation

INSERTING THE BOBBIN

1. Place bobbin into bobbin holder with the thread unwinding
counter clockwise.
2. Draw thread into notch (A).
3. Pull thread toward the left and along the inside of spring (B)
until it slips into notch (C) being sure that thread does not slip
out of notch (A).
4. Pull thread out about 10 cm and replace the bobbin cover by
inserting the left side and lowering the right side till snaps into position.

THREADING THE MACHINE

THREADING THE UPPER THREAD

1. Raise the presser foot lifter.
2. Press the needle up/down button and set needle.
3. Place a spool of thread onto spool pin and set the spool cap.
1 – 7. Pass thread along the arrow marks on machine.
134