Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TEST COMPONENTS
01 M10 x 1.5
02 M10 x 1.0
03 M7 x 1.0
04 M8 x 1.25
05 3/8" x 24UNF
06 1/4" x 28UNF
07 7/16" x 24UNF
08 7/16" x 20UNF
09 5/16" x 24UNF
10 M8 x 1.0
CAUTIONS & WARNINGS
The vehicle is NOT to be driven with the ABS & Brake Pressure Gauge installed.
This tool is for static bay testing only.
To assist you in freeing up frozen bleeder valves, GM does allow the use of a propane torch on
some of their cast iron calipers. Properly used, this should not cause secondary problems.
Do Not press on brake pedal with more than normal braking pressure. Exceeding maximum gauge
psi pressure will damage gauges and void warranty.
The use of oxy-acetylene torches to the bleeder valves to remove them is not recommended.
Using a torch such as this can easily cause enough heat to be placed into the caliper or wheel
cylinder body to damage the square cut seal or wheel cylinder cups.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
ABS & Brake Pressure Gauge
Tel.: 02196 720480
Fax.: 02196 7204820
11
M10 x 1.0
12
M10 x 1.25
13
M6 x 1.0
L
45° Fitting
M
M8 x 1.0
N
0-200 kg/cm² | 0-3000 psi
O
P
M14 x 1.5
Q
90° Fitting
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 6964
Tabla de contenido
