Tabla de contenido
G B
D E f r I t E s s E N L P t f I D K N o G r P L H u c Z s
G B
D E f r I t E s s E N L P t f I D K N o G r P L H u c Z s
INstructIoNs for usE
INstructIoNs for usE
The GLOSAIR™ 400 Cartridge is intended to be used only in combination with the
The ASP GLOSAIR™ 400 Cartridge is intended to be used only in combination with the ASP
GLOSAIR™ 400 System for decontamination of surfaces in environments such as hospitals,
GLOSAIR™ 400 System for decontamination of surfaces in environments such as hospitals,
healthcare, commercial and industrial facilities.
healthcare, commercial and industrial facilities.
The GLOSAIR™ 400 Cartridge must be used according to the instructions described in the
The ASP GLOSAIR™ 400 Cartridge must be used according to the instructions described in the
User Manual supplied with the GLOSAIR™ 400 System.
User Manual supplied with the ASP GLOSAIR™ 400 System.
APPLIcAtIoN
APPLIcAtIoN
The GLOSAIR™ 400 System releases 6ml/m³ of solution from the GLOSAIR™ 400 Cartridge
The ASP GLOSAIR™ 400 System releases 6ml/m³ of solution from the ASP GLOSAIR™ 400
into the room with an average output of 30 ml/ minute. The required contact time for effective
Cartridge into the room with an average output of 30 ml/ minute. The required contact time for
decontamination after the complete diffusion is two hours.
effective decontamination after the complete diffusion is two hours.
ActIVE INGrEDIENts
ActIVE INGrEDIENts
6% hydrogen peroxide
5 - 6% hydrogen peroxide and 50 ppm silver cations.
DIrEctIoNs for usE
DIrEctIoNs for usE
Step 1
:
Step 1
:
Align the red dot on the GLOSAIR™ 400 Cartridge with the red dot on the
Align the red dot on the ASP GLOSAIR™ 400 Cartridge with the red dot on the ASP
GLOSAIR™ 400 System. Insert the GLOSAIR™ 400 Cartridge into the cartridge
GLOSAIR™ 400 System. Insert the ASP GLOSAIR™ 400 Cartridge into the cartridge
chamber of the GLOSAIR™ 400 System.
chamber of the ASP GLOSAIR™ 400 System.
Step 2
:
Step 2
:
Wait for the GLOSAIR™ 400 Cartridge to be identified by the system. If the dentification or
Wait for the ASP GLOSAIR™ 400 Cartridge to be identified by the system. If the identification
rejection message does not appear, repeat step 1. If the GLOSAIR™ 400 Cartridge
or rejection message does not appear, repeat step 1. If the ASP GLOSAIR™ 400 Cartridge
identification fails, use another cartridge. Identification faire could be caused by an expired
identification fails, use another cartridge. Identification failure could be caused by an expired
product or an incompatible product.
product or an incompatible product.
Step 3
:
Step 3
:
Turn the GLOSAIR™ 400 Cartridge clock-wise and lock into place. Ensure the red dot on the
Turn the ASP GLOSAIR™ 400 Cartridge clock-wise and lock into place. Ensure the red dot on
cartridge is aligned with the lock symbol on the GLOSAIR™ 400 System.
the cartridge is aligned with the lock symbol on the ASP GLOSAIR™ 400 System.
Step 4
:
Step 4
:
Drill the air vent sticker.
Remove the air vent sticker.
Step 5
:
Step 5
:
Wait for the solution from ASP GLOSAIR™ 400 Cartridge to flow into the tank.
Wait for the solution from GLOSAIR™ 400 Cartridge to flow into the tank.
Step 6
:
Step 6
:
The display panel on the GLOSAIR™ 400 System will show the main menu screen once the
The display panel on the ASP GLOSAIR™ 400 System will show the main menu screen once
tank is filled.
the tank is filled.
Tabla de contenido
