Regular Inspection And Maintenance; Daily Inspections; Weekly Inspections - ACO Lipujet-P-OAP Instrucciones De Empleo

Grease Separator

Regular Inspection and Maintenance

5 Regular Inspection and Maintenance
ACO recommends that you conclude a maintenance contract. This guarantees that mainte-
nance work is carried out professionally and completed in good time by ACO product specia-
lists, section 1.1 "ACO Service".
Qualifications required for inspection and maintenance,
Persons".
Enter inspections, maintenance work and test results in the operating log book:
Inspections carried out by the operator
■
Taking samples
■
Measurement: water consumption, thickness of sludge and grease layers, pH reading,
■
temperature
Maintenances and general inspections
■
Disposals (emptying and cleaning)
■
NOTICE If inspections identify faults, the grease separator may only be put into operation
again when they have been rectified.

5.1 Daily Inspections

Checks carried out by the operator:
Check the grease separator for external damage.
■
Remove dirt in the intake pipe grit collector.
■

5.2 Weekly Inspections

Checks carried out by the operator:
Check the grease separator, connections, and mechanical and electrical components for
■
external damage.
Check the volume of sludge in the sludge trap and the thickness of the grease layer.
■
Remove coarse floating matter from the surface of the water.
■
For grease separators with a filling unit: Check the hydraulic seal in the odour
■
62
section 1.5 "Qualification of
trap.