Tractor Coupling; Important - Nogueira FTN-2500 Manual De Instrucciones

4.3- Tractor coupling

The harvester works attached to the rear
position of the tractor. The coupling is
performed through the tractor's three-point
hydraulic lift system.
Choose a flat location and be aware
performing this procedure, there is a risk of
personal injury.
During coupling:
ƒ Make sure the tractor is braked.
ƒ Operate the tractor's three-point hydraulic
system slowly and carefully.
ƒ Never stand between the tractor and the
machine.
CAUTION!
Risk of being pressed between the tractor
and the machine in the event of involuntary
movement of one of them. Stay out of this
risk area during coupling.
The attention when coupling the machine
to the tractor ensures safety to all involved.
The use of personal protective equipment
(PPE) is mandatory during this procedure.

IMPORTANT!

Before coupling, check if the power
of the tractor is compatible with that
requested by the machine.
Approximate the tractor to the machine,
1.
aligning the tractor power take-off to the
machine's drive shaft;
Lower the tractor's hydraulic arms to the
2.
height of the machine couplings;
Start the coupling by the left arm (A), then
3.
the right (B) and finally the third point (C);
Lock the arms with the locking pins
4.
provided with the machine.
Instructions Manual
4. Preparation
C
A
B
47