Checking The Oil Level; Oil Change; Recommended Oils - Nogueira FTN-2500 Manual De Instrucciones

6. Maintenance
6.12.2- Oil lubrication
Side gearboxes (A and B):
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Recommended oil: 150/CLP.
Viscosity: ISO 150.
Specification: DIN 51517/3.
Oil capacity (gearboxes A and B): 1.2 liters

Checking the oil level:

Wipe around the level plug on the gearbox.
Loosen the level plug and check that the oil
reaches the hole in the plug.
If necessary, add lubricating oil until it begins
to seep through the hole in the level plug.

Oil Change:

First exchange: after a week or 50 hours of
work, whichever comes first.
Other changes: every year or 500 hours of
work, whichever occurs first.
Procedure for oil changing:
place the machine in a flat and level place.
1.
Put an appropriate recipient under the
2.
drain plug so that the dripped oil from
the gearboxes is collected.
Remove the breather plug, the drain plug
3.
and leave the oil drip completely.
Replace the drain plug.
4.
Fill with the recommended oil.
5.
Replace the breather.
6.

RECOMMENDED OILS

PETROBRAS LUBRAX GEAR 150
TEXACO MEROPA 150
AGIP BLASIA 150
SHELL OMALA 150
102
A
LEVEL
Instructions Manual
B
SUPPLY
DRAIN