Disconnecting The Hoses; How To Uncouple The Machine From The Tractor; Clearing (Unclogging) - Nogueira FTN-2500 Manual De Instrucciones

5. Operation
5.8-

Disconnecting the hoses

Before disconnecting the hydraulic hoses
1.
from the tractor valves, it is necessary to
relieve the system pressure. To do this, turn
off the tractor and then repeatedly push
the levers, easing the system.
With the control levers in the neutral
2.
position, pull the hoses quickly: the
disconnection will occur with minimum
oil loss.
Then, reinsert all the protective caps (A)
3.
into the hose couplings and the tractor
valves.

5.9- How to uncouple the machine from the tractor

Choose a flat location to uncouple the machine from the tractor.
Be aware when performing this procedure there is a risk of personal injury.
ƒ Turn off the power take off.
ƒ Park the machine on a level and sturdy ground;
ƒ Engage the tractor's parking brake;
ƒ Disconnect the hydraulic hoses (as instructed in the previous item).
ƒ Lower the machine to the ground.
ƒ Remove the cardan shaft;
ƒ Disengage the tractor machine.

5.10- Clearing (unclogging)

In case of obstruction (clogging) of the machine, unplug the power take-
off and tractor engine immediately.
Make sure the tractor engine is turned off
and the key has been removed from the
ignition before unclogging the machine.
Never approach the feeding rollers without
being sure that the tractor engine is off and
the machine without any movement.
78
DANGER!
Instructions Manual
A