Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Presentation
APPLICATION
The HAYNOG-300 was designed for swathing
or spreading diverse products used for
producing hay etc., especially for diverse types
of grasses.
COUPLING TO THE TRACTOR
To facilitate the coupling process and safer,
select a flat location for coupling the machine to
the tractor.
Category I
smaller pins on
the outside
Category II
larger pins on
the outside
The lower connecting pins are reversible,
which makes them enabled for coupling the
HAYNOG-300 to category I or II tractors:
- Cat. I: The smaller diameter pin is placed on
the outside.
- Cat. II: The larger diameter pin is placed on the
outside.
See the figures below:
NOTE: If you wish to change the category, just
remove the pins A and invert the position of the
connectors (fig.5).
Do not stay between the tractor and the
machine while performing the coupling
operation; always handle the connector
parts from the third point outside the danger
zone (the space between the machine and
the tractor). The tractor or machine may
accidentally move and provoke an
accident.
HAYNOG-300
CAUTION
11
Capítulos
Tabla de contenido
