Introduction; Technical Specifications - Beissbarth BAC 4100a Instrucciones Originales

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 128
The BAC 4100a machine is used on R134a equipped
vehicles and is designed to be compatible with existing
service equipment and standard service procedures.
This machine is a single-pass system (i.e. refrigerant
flows through a filter once) that meets specifications
for recycled refrigerant. Follow recommended service
procedures for the containment of refrigerant.
The machine includes a high vacuum pump for fast,
thorough evacuation. The compressor first pulls the
A/C system to 0 psi gauge; the compressor then works
with the vacuum pump to pull a vacuum to an absolute
pressure of less than 0.3 bar.
Note: Refrigerant systems require special oils. Refer to
the A/C system manufacturer's service manual for oil
specifications.

Technical Specifications

Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/3 HP
Dimensions . . . . . . . . . . . . . . . . . . 107 cm x 61 cm x 76 cm
Display . . . . . . . . . . . . . . . . . . . .5.7 in. TFT 1/4 VGA graphic
Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .700 cc
Humidity . . . . . . . . . 32.2°C (90°F), 80% RH non-condensing
Manometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ø 100 mm
Maximum Altitude (above sea level) . . . . 2000 m (6561 ft.)
Maximum Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 bar
Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <70 dB(A)
Nominal Voltage . . . . . . . . . . . . . . . . . . . . . .230V, 50/60 Hz
Oil Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3x 250 ml
Operating Temperature . . . . . . . . . . . . . . . . . 10°C to 50°C
Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . 1100 VA
Pump Free-Air Displacement . . . . 6 CFM (170 l/m) 50 Hz
Service Hoses . . . . . . . . . . . . . . . . . . . .250 cm / SAE J2196
Tank Capacity . . . . . . . . . . . . . . . . . . . . . 9.09 kg (20.04 lb.)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 kg
BAC 4100a Rev. A

Introduction

BAC 4100a
5
loading