Operating Instructions; Recover Refrigerant From A Vehicle - Beissbarth BAC 4100a Instrucciones Originales

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 128

Recover Refrigerant from a Vehicle

1. Empty the oil drain bottle before starting a recovery.
Remove the oil drain bottle from the machine by
pulling the bottle straight down — do not use a
twisting or rocking motion. Refer to Figure 6.
Note: The machine sounds an alert when the oil drain
bottle is full, but it is a good practice to completely
empty the oil drain bottle before recovering an
A/C system.
2. Connect the high-side (red) and low-side (blue)
hoses to the vehicle A/C system.
3. Open the coupler valves on the hoses by turning the
collars clockwise.
4. Select the RECOVERY function by pressing the
Recover button on the control panel, or by selecting
Recovery from the RRR menu as shown in Figure 7.
1
2
Press the
3
number on
4
the keypad
5
that
6
matches
the number
of the
function.
HELP
DATABASE
BAC 4100a Rev. A
Operating Instructions — Recover
Setup
Functions
RRR
System Flush
Database
Update
Esc
OK
9
MENU
STOP
WARNING: To prevent personal
injury while working with refrigerant,
read and follow the instructions
and warnings in this manual, and
wear protective equipment such as
goggles and gloves.
Figure 6
Oil Drain
Bottle
1
2
3
4
ESC
Another way to select
Recovery is by pressing
the RECOVER button on
the control panel.
Recovery
Vacuum
Charge
Automatic
Esc
Figure 7
15
loading