Protective Devices; Refrigerant Tank Test - Beissbarth BAC 4100a Instrucciones Originales

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 128
Safety Precautions
CAUTION : To prevent equipment damage,
TO PREVENT CROSS-CONTAMINATION, USE THIS MACHINE WITH R134A REFRIGERANT ONLY.
The machine is equipped with special connectors to recover, recycle, and recharge only R134a refrigerant.
Do not attempt to adapt the machine for another refrigerant. Do not mix refrigerant types through a system
or in the same container; mixing of refrigerants will cause severe damage to the machine and the vehicle
air conditioning system.
DO NOT USE THIS MACHINE IN DIRECT SUNLIGHT. Position the machine far from heat sources, such as
direct sunlight which can cause excessive temperatures. The use of this machine under normal environmental
conditions (10°C to 50°C) keeps pressures under reasonable limits.
DO NOT USE THIS MACHINE OUTDOORS DURING RAIN OR HIGH HUMIDITY. Protect the machine from
conditions that may cause electrical failure or other hazards relating to ambient interaction.
DO NOT USE THIS MACHINE IN AREAS WHERE THERE IS A RISK OF EXPLOSION.
SET UP THE MACHINE ON AN EVEN SURFACE AND UNDER SUFFICIENT LIGHTING. LOCK THE
FRONT WHEELS, AND DO NOT SUBJECT THE MACHINE TO VIBRATION.
Further information regarding health and safety may be obtained from the refrigerant manufacturer.

Protective devices

Beissbarth No. BAC 4100a is equipped with the following protective devices :
Over pressure valves.
A maximum pressure switch stops the compressor when excessive pressure is sensed.
WARNING: Tampering with these protective devices could result in serious injury.

Refrigerant Tank Test

Official records and recurring tests necessary for pressurized instruments are governed by laws and / or
national regulations depending on the country where the refrigerant tank is used. The system manager is
responsible for respect of laws, regulations, and technical rules. During normal service, refrigerant tanks
do not need maintenance. Refer to the Maintenance section of this manual for more information.
4
loading