Fujitsu Control 4 Serie Guia Del Usuario página 8

To open a virtual media session with a target device, you must first connect the target
device to a switch using the adapter cable. For a smart card, you must first connect the
target device to a switch using the smart card-capable adapter cable.
Access the switch via a standard TCP/IP network
The switch provides agentless remote control and access. No special software or
drivers are required on the attached servers or client.
The client connects to the switch using an Internet browser.
You can access the switch and all attached systems via Ethernet or using a V.34,
V.90, or V.92 modem from a client. The clients can be located anywhere a valid
network connection exists.
DSView 3 Management Software plug-in
The DSView 3 software may be used with the switch to allow IT administrators to
remotely access, monitor, and control target devices on multiple platforms
through a single, web based user interface. For more information, see the
DSView 3 Software Plug-In for KVM s4 Switches Technical Bulletin.
590-1058-640A
1.1 Features and benefits
3