Launching A Session - Fujitsu Control 4 Serie Guia Del Usuario

4. The Video Viewer
3. Use the arrow keys to specify the number of elapsed seconds prior to hiding
the toolbar.
4. Click OK to save your changes and close the dialog box.
4.2

Launching a Session

When using a non-proxied connection, video performance over a slower network
connection may be less than optimal. Since certain color settings (such as Grayscale)
use less network bandwidth than others (such as Best Color), changing the color
settings can increase video performance. For optimal video performance over a slower
network connection, use a color setting such as Grayscale/Best Compression or Low
Color/High Compression. See "Adjusting the View" on page 51 for more information.
If a user connects to a target device with a higher screen resolution than the local
computer, the Video Viewer window will display a portion of the target device screen,
with scroll bars for viewing the remainder of the screen. The user may view the entire
screen by adjusting the resolution on the target device, the local computer or both.
To launch a KVM session from the switch Explorer window:
1. Click on a device listed on the Target Devices screen to open the unit
overview window.
2. Click the KVM Session link to open the Video Viewer in a new window.
Session time-out
A remote session can time-out when no activity occurs in a Session window for a
specified time. The session time-out value can be configured in the Appliance
KVM Session Settings window. The specified time-out value will be used the next
time the switch OBWI is accessed.
To enable, disable or configure the session time-out:
1. In the side menu, select Unit View > Appliance > Appliance Settings >
Sessions > General.
2. Select the desired setting for the Enable Inactivity Timeout box.
3. If necessary, select the time limit for the inactivity time-out.
4. Click Save.
50
590-1058-640A