Fujitsu Control 4 Serie Guia Del Usuario página 48

Figure 3.6. Power device outlet settings page
• The Manual Name assignment gives a unique name to a outlet. The name
must be unique for all the adapter cables and power outlet names. An
attempt to specify a manual name which is not unique will result in an error
and the name will not be saved.
• The Link to Target Device assignment links the outlet to another target name
(either an outlet or adapter cable) for power control of the named target.
When an outlet is linked to an adapter cable target name, typically the outlet
physically provides power to the server attached to the adapter cable.
• The Do Not Display as Target Device option gives the outlet a blank name,
which prevents it from being displayed on the Target Devices page. This
option may be used for spare outlets to remove them from the Target Devices
page.
Access control inheritance
When a power outlet name is changed by linking it to a target, the outlet inherits
the access control already configured for that target name. When an adapter
cable is added, if the name retrieved from the adapter cable matches the name of
an existing target, the new adapter cable inherits the access control from that
target. When a target device is renamed, all the adapter cables and outlets of that
target are renamed, and they carry forward the access control previously
configured for the old target name.
Renaming of a target device
On the Target Overview page, the name for that target may be changed to any
unique target name. The name must be unique for the set of all targets, including
adapter cables and power outlets. When a target is renamed, all outlets linked to
that target are also given the new target name.
590-1058-640A
3.17 Power device settings
43