Fujitsu Control 4 Serie Guia Del Usuario página 45

3. Local and Remote Configuration
about that power device: Name, Description, Status, Version, Sockets, Vendor
Name, Model, and Input Feeds.
If a target device is connected to a power control device outlet, you can turn on,
turn off or cycle (turn off, then turn on) the target device.
To turn on, turn off or power cycle a target device:
1. From the side navigation bar, select Unit View > Appliance > Appliance
Settings > Ports > Power Devices to open the Appliance Power Devices
screen.
2. Click the name of the unit you wish to configure and select Sockets.
3. Select the check box to the left of the socket(s) that you wish to configure.
4. Click On, Off, or Cycle, as desired.
To delete offline power devices:
1. From the side navigation bar, select Unit View > Appliance > Appliance
Settings > Ports > Power Devices to open the Appliance Power Devices
screen.
2. Click Delete Offline.
To change the minimum on time, off time or wake up state:
1. From the side navigation bar, select Unit View > Appliance > Appliance
Settings > Ports > Power Devices to open the Appliance Power Devices
screen.
2. Click the name of the unit you wish to configure and select Sockets.
3. Click the socket name that you wish to modify.
4. Use the drop-down windows to alter the desired settings and click Save.
Associated target servers and power outlets
By naming one or more power outlets with the same name as a target server, the
outlets are linked or associated with the target server for easier control. In the
OBWI Target Devices page, power control actions are selectable for a target with
linked outlets. On the Target Overview page, a Wall Outlet Power table shows the
outlets linked with a target device.
In the following figure, the target device named Server2 has linked power outlets.
Clicking on the drop-down menu arrow in the Action column shows the additional
power actions available.
40
590-1058-640A