Adjusting Mouse Settings On Target Devices - Fujitsu Control 4 Serie Guia Del Usuario

• The LED blinks "SOS" if a fault condition occurs, such as power supply
failure, elevated ambient temperature, or fan failure. The LED will continue to
blink "SOS" as long as the failure persists.
The switch prevents a serial break from the attached device if the module loses
power. However, a user can generate a serial break with the attached device by
pressing Serial Break on the serial session viewer.
2.7

Adjusting mouse settings on target devices

Before a computer connected to the switch can be used for remote user control,
you must set the target mouse speed and turn off acceleration. For machines
running Microsoft
Windows 2008 and Windows 7), use the default PS/2 mouse driver.
To ensure that the local mouse movement and remote cursor display remain in
sync, mouse acceleration must be set to "none" for all user accounts accessing a
remote system through a KVM switch. Mouse acceleration must also be set to
"none" on every remote system. Special cursors should not be used and cursor
visibility options, such as pointer trails, Ctrl key cursor location animations, cursor
shadowing, and cursor hiding, should also be turned off.
If you are not able to disable mouse acceleration from within a Windows operating
system, or if you do not wish to adjust the settings of all your target devices, you may use
the Tools > Single Cursor Mode command available in the Video Viewer window. This
command places the Video Viewer window into an "invisible mouse" mode, which
allows you to manually toggle control between the mouse pointer on the target system
being viewed and the mouse pointer on the client computer.
590-1058-640A
2.7 Adjusting mouse settings on target devices
® ®
Windows (Windows XP, Windows Vista, Windows 2003,
17