Fujitsu Control 4 Serie Guia Del Usuario página 68

-or-
If the client server's operating system supports drag-and-drop,
select the desired ISO or floppy image file from the common file
dialog box, and drag it onto the Virtual Media dialog box.
c. The file's header is checked to ensure it is correct. If it is, the common file
dialog box will close and the chosen image file will appear in the Virtual
Media dialog box, where it can be mapped by clicking the Mapped
check box.
d. Repeat steps a through c for any additional ISO or floppy images you
wish to add. You may add any number of image files (up to the limits
imposed by memory), but you may only have one virtual CD or DVD or
virtual mass storage mapped concurrently.
If you attempt to map too many drives (one CD or DVD and one mass storage
device) or too many drives of a particular type (more than one CD or DVD or
mass storage device), a message will be displayed. If you still wish to map a new
drive, you must first unmap an existing mapped drive, then map the new drive.
After a physical drive or image is mapped, it may be used on the target device.
To unmap a virtual media drive:
1. In the Virtual Media dialog box, uncheck the Mapped check box next to the
drive you wish to unmap.
2. You will be prompted to confirm. Confirm or cancel the unmapping.
3. Repeat for any additional virtual media drives you wish to unmap.
To display virtual media drive details:
In the Virtual Media dialog box, click Details. The dialog box expands to display
the Details table. Each row indicates:
• Target Drive - Name used for the mapped drive, such as Virtual CD 1 or
Virtual CD 2.
• Mapped to - Identical to Drive information that appears in the Client View
Drive column.
• Read Bytes and Write Bytes - Amount of data transferred since the mapping.
• Duration - Elapsed time since the drive was mapped.
To close the Details view, click Details again.
590-1058-640A
4.10 Virtual Media
63