Power Device Settings - Fujitsu Control 4 Serie Guia Del Usuario

3. Click either Set USB 1.1 Speed or Set USB 2.0 Speed.
Upgrading adapter cables
The adapter cable Flash upgrade feature allows appliance administrators to
update the adapter cable with the latest firmware available. This update can be
performed using the switch user interface or DSView 3 software.
After the Flash memory is reprogrammed with the upgrade, the switch performs a
soft reset, which terminates all adapter cable sessions. A target device
experiencing an adapter cable firmware update may or may not display as
disconnected. The target device will appear normally when the Flash update is
completed.
If the appliance is configured to Auto-Upgrade adapter cables, the adapter cables
will automatically update when the switch is updated. To update your switch
firmware, see "KVM s4 Switch Tools" on page 27 or the DSView 3 Software
Online Help. If issues occur during the normal upgrade process, adapter cables
may also be force-upgraded when needed.
Check http://www.ts.fujitsu.com for firmware upgrade files.
To upgrade the adapter cable firmware:
1. From the side navigation bar, click Unit View > Appliance > Appliance
Settings > Ports > Adapter cables to open the Appliance adapter cables
screen.
2. Select the check box(es) next to the adapter cable(s) that you wish to
upgrade and click Upgrade.
WARNING: Disconnecting an adapter cable during a firmware update or cycling power
to the target device will render the module inoperable and require the adapter cable to
be returned to the factory for repair.
3.17

Power device settings

You must have administrator privileges to change power control device settings.
From the Appliance Power Devices screen, you can view a list of connected
power devices, as well as the following information about each power device:
Name, Port, Status, Version, Model, Buzzer, Alarm, and Temperature. You can
also select a power device, then select Settings to view the following details
590-1058-640A
3.17 Power device settings
39