Fujitsu Control 4 Serie Guia Del Usuario página 67

4. The Video Viewer
Figure 4.4. Video Viewer Virtual Media Dialog Box
To map a virtual media drive:
1. Open a virtual media session from the Video Viewer menu by selecting Tools
> Virtual Media.
2. To map a physical drive as a virtual media drive:
a. In the Virtual Media dialog box, click the Mapped check box next to the
drive(s) you wish to map.
b. If you wish to limit the mapped drive to read-only access, click the Read
Only check box next to the drive. If the virtual media session settings
were previously configured so that all mapped drives must be read only,
this check box will already be enabled and cannot be changed.
You might wish to enable the Read Only check box if the
session settings enabled read and write access, but you
wished to limit a particular drive's access to read only.
3. To add and map an ISO or floppy image as a virtual media drive:
a. In the Virtual Media dialog box, click Add Image.
b. The common file dialog box will appear, with the directory containing
disk image files (that is, those ending in .iso or .img) displayed. Select
the desired ISO or floppy image file and click Open.
62
590-1058-640A