LU-VE Emeritus LU1W Manual De Usuario página 151

-
CLEANING: see par. 8.3 Cleaning the Exchanger
-
WASHING: see par. 8.4 Coil Wash
-
DISCHARGE: see cap. 9 WATER DISCHARGE
-
OPTIMIZATION: It contains the "setting" parameters of the setting, described in the various sections
of chapter 4 DRY COOLING/CONDENSING ADJUSTMENT
-
LOW POWER: see par. 4.3.2 Winter Function
-
FAN FUNCTIONS: see chap. 7 MODBUS FAN MANAGEMENT
-
RESTORE: command to reset all the parameters to factory settings
-
WIZARD: command to recall the first installation procedure
•
ADVANCED (level 1): In the advanced menu there is the entire parameter map of the controller, including
advanced settings for expert users
Sub-menu:
-
REGULATION
-
VENTILATION
-
OUTDOOR TEMPERATURE (T. OUTDOOR)
-
CLEANING
-
ANTILOCK
-
SAFETIES
-
VARIOUS
-
CONFIGURATION
-
I/O STATUS
-
CALIBRATION
-
MANUAL
-
INFO
-
MODBUS
-
ERASE HISTORY
-
PASSWORD
•
MANUFACTOR (level 2): contains parameters related to the hardware configuration of the heat exchanger,
e.g. whether it is a liquid cooler or condenser, number of fans, wet resources present, etc.
•
RTC (level 0): allows you to set the clock.
•
ALARMS (level 0): Displays alarms in progress
•
HISTORY (level 0): Displays history of last 100 alarms that occurred
•
HOURS (Level 0): Displays operating hours of the device, each fan, the spray resources
•
DATALOG (level 0): allows access to DATALOG menu to export history (see chapter 15 DATALOG MENU)
•
SAVE PAR USB: command to save its parameter map to a USB stick (see chapter 16 RESTORING FACTORY
PARAMETERS AND SAVING/UPLOADING SETTINGS)
•
LOAD PAR USB: command to load a parameter map from a USB stick (see chapter 16 RESTORING FACTORY
PARAMETERS AND SAVING/UPLOADING SETTINGS)
•
Language: user interface language choice
The various menus are organized on different levels of management ranging from level 0 up to level 2. Level 0 is the
user level and does not require a password; Level 1, made up of the ADVANCED menu, is devoted to expert users
requiring a password. A password is also required to access the Level 2 MANUFACTOR menu, dedicated to LU-VE and
containing the factory settings and exchanger configuration.
LU1W - User Manual 28 REV.1.1 – 07/11/2017 - ENG