Maintenance - Ecolab EcoAdd Instrucciones De Servicio

12

Maintenance

Personnel:
Protective equipment:
DANGER!
Personal protective equipment, hereinafter referred to as PPE, is used to
protect personnel. It is imperative to pay attention to the PPE described in
the product data sheet (safety data sheet) for the metered medium.
NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools.
Only use the correct tools.
If maintenance is due, this is shown on the pump display. For more
information, see
and
CAUTION!
Information for authorised service personnel of the firm Ecolab
A separate service manual is available, which can be requested from the
manufacturer if you have the appropriate qualification or authorisation, or it can
be downloaded using the existing login at www.ecolab-engineering.com .
The wearing and spare parts belonging to the pump type can be identified
using the pump key.
The pump key (
nameplate (
and is also shown on the 'INFO' screen (
on page 58 ) of the pump. Before maintenance is carried out, stocks of the
pump-specific wearing and spare parts (
parts and accessories' on page 172 ) should be obtained.
For all queries to the manufacturer, it is important that the designation
and the pump type are quoted correctly. This is the only way of ensuring
fast and accurate processing of your enquiry.
n Mechanic
n Qualified electrician
n Service Personnel
n Specialist
n Protective gloves
n Chemical-resistant protective gloves
n Protective eyewear
n Safety shoes
Ä 'Symbols during operation (operating mode):' on page 60
Ä Chapter 10.4 'Confirming pump service' on page 153 .
Ä 'Pump key 'EcoAdd' ' on page 191 ) is located on the
Ä 'Equipment marking / nameplate' on page 190 ) of the pump
Ä Chapter 8.2 'Start screen'
Ä Chapter 13 'Wearing parts, spare
161
Maintenance
MAN046939 Rev. 6-10.2021