Installation, Maintenance And Repair Work - Ecolab EcoAdd Instrucciones De Servicio

Safety
Instructions on data transfer and use of Bluetooth
n Update the operating system on the smartphone or tablet being used:
Many attacks utilise weak points in the operating systems and outdated Bluetooth
protocols, and for this reason smartphones and tablets must always be kept up to
date. The installation of malware protection on the smartphone or tablet offers further
protection.
n Only activate Bluetooth
®
Bluetooth
n Lock the 'EcoAdd' diaphragm metering pump with an access code:
Due to the locking of the pump described in the pump operating manual via an access
code, the pump is set to "invisible" in the Bluetooth
The basic Bluetooth
entering the access code within the 'EcoAPP' .
n Check the active instruments in Bluetooth
Only connect known instruments to the smartphone or tablet. If you want to connect
unknown instruments, these should first be checked, or identified and rejected as
necessary
n Note other instruments in the reception range!
Only perform pairing with other instruments when there are no other (unknown)
instruments in the reception range and check automatic pairings. Bluetooth
instruments generally establish connections automatically when this function is
switched on. For this reason, regular checks should be performed as to which
instruments are being used to connect automatically to the smartphone or tablet used.
This is displayed in the settings for the smartphone or tablet. If there are unknown
instruments there, the corresponding pairing should be disconnected.
2.10

Installation, maintenance and repair work

NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools.
Only use the correct tools.
DANGER!
Damage and injuries may occur if installation, maintenance or repair
work is carried out incorrectly.
All installation, maintenance and repair work must only be performed by
authorised and trained specialist personnel in accordance with the applicable
local regulations. Safety regulations and prescribed protective clothing when
handling chemicals should be followed. Attention must be paid to the
information included on the product data sheet for the metering medium used.
Prior to all work the feeding of the dosing medium should be disconnected and
the system cleaned.
NOTICE!
Only original equipment spare parts may be used for maintenance and
repairs.
MAN046939 Rev. 6-10.2021
®
when required:
should be switched off whenever it is not required.
®
function is retained, but the 'EcoAdd' is only detectable by
® :
®
environment.
®
Overview:
22
®
®