Factory Setting - Ecolab EcoAdd Instrucciones De Servicio

Control/software
8.8.1 Pump name
Under menu item "Pump name" an individual name can be entered, which is then shown
in the display.
Fig. 38: Configuration: [Pump name]

Factory setting:

EcoXxx XX.XX l/h (depending on the electronics version and litre capacity).
[Set the Pump name]:
1.
[Call the main menu]:
2.
[Select Configuration]:
3.
[Select Pump name].
ð The display switches to the screen for viewing or editing the pump name.
4.
[Use the slider to change the name of the pump] as described in
buttons, selection fields, number and text input' on page 57 .
5.
Press the
ð The screen switches to the [Configuration] overview.
6.
Press the
7.
Press the
MAN046939 Rev. 6-10.2021
3
Ä Chapter 8.5 'Main menu' on page 63
Ä Chapter 8.8 'Configuration' on page 89
Use the delete button
want to change or that was entered incorrectly.
button to save the [Pump name].
button to return to the [Main menu].
button to return to the [Operating display].
5
4
(item 6) to remove an existing name that you
90
Ä 'Scroll bars, radio