Ecolab EcoAdd Instrucciones De Servicio página 338

Control/software
Import file has codes; pump does not have codes
During the import, the program displays a prompt asking whether the access
codes should be deleted.
10
Fig. 77: Import file with codes; pump without codes
1.
Function
ð Screen changes to [Configuration] USB export / USB import.
2.
[Select USB import ] (item 1).
ð The screen displays the configuration files located on the USB stick (item 2).
3.
Select the desired configuration file.
ð
4.
The screen represents the import process by a rolling circle (item 7).
ð Once complete, the screen switches to a status screen (item 8).
5.
Pressing the
ð An Info screen (item 10) with the new configuration data is shown briefly, and
then changes to the [Operating display] (item 11).
MAN046939 Rev. 6-10.2021
1
6
5
Ä Further information on page 128 .
Since the import file contains an access code, the program displays a
prompt about deleting the code from the import file (item 3).
If you confirm the selection
the codes from the import file are deleted and the program displays an
information screen (item 5). You can then use the Next button
6) to start the import process. If you do not confirm the selection, the
access codes from the import are transferred to the pump.
button (item 9) restarts the pump.
2
7
11
and press the Next button
134
4
3
9
8
(item 4),
(item