Cleaning Notes; Faults And Remedies - DENTSPLY Multimat 2 Touch Manual De Instrucciones

7.6 Inspections
After 15,000 lift cycles a warning note is indicated in the display which can be reset with the "C" button. We recommend an inspection of the
furnace. During this inspection, essential functions are checked and components replaced, if required.
Please ask your specialist dealer for Dentsply services.

7.7 Cleaning notes

The Multimat2 Touch is varnished with an epoxy paint. Please use a mild household detergent for cleaning the varnished
sur face. The touch screen may be cleaned only when the unit is switched off with a mild window cleaner.

8 Faults and remedies

The following information is intended to assist you in identifying and evaluating simple errors and to fix them by appropriate remedial action.
A n error message, its probable cause and the appropriate
remedial action is shown in brief on the display. Confirm the displayed message by pressing the "C" key. Additional information to the reason of
the fault can be displayed by pressing the
For faster identification, the messages are labeled with an alphanumeric prefix. If the fault cannot be corrected, please contact your distributor.
Spare parts can be ordered by your distributor only.
3
Warning!
Disconnect the unit from main power before opening the housing.
1
Caution!
It is the users' responsibility to send the furnace back in a proper package.
Use only the original package. Contact the supplier if you need a new original package.
Confirm all error and information messages first with "C".
All manuals and user guides at all-guides.com
"?" button in the left upper corner.
75