Technical Data; Environment Conditions - DENTSPLY Multimat 2 Touch Manual De Instrucciones

1.2 Technical data

Note:
The units Multimat2 Touch und Multimat2 Touch+Press are delivered in 2 different voltage systems,
including a power lead (as required for the country in which it is operated):
• 100 – 125 Volt ~ / 50/60 Hz
• 230 – 240 Volt ~ / 50/60 Hz
Check the voltage rating of your unit on the type plate, which is located on the rear of the unit. Make sure that the
voltage rating and the supplied power cord are appropriate for your local power network.
Power consumption
Pump connection
Overvoltage category
Protection class
Instrument fuses
Degree of contamination
Weight
Dimensions H/W/D
Dimensions H/W/D
Input compressed air pressure

1.3 Environment conditions

Environment temperature:
Relative humidity:
Altitude:
50
All manuals and user guides at all-guides.com
Multimat2 Touch
1,350 W (without vacuum pump)
As mains voltage, max. 2.5 A
II
I
100 — 125 V : 2 x 10 AT
230 — 250 V : 2 x 6.3 AT
2
22 kg
441/320/425 mm closed
585/320/425 mm opened
–
2 °C to 40 °C (35,6 °F to 104 °F)
max. 80 % at 31 °C (87,8 °F)
max. 3500 m above sea level
Multimat2 Touch+Press
1,350 W (without vacuum pump)
As mains voltage, max. 2.5 A
II
I
100 — 125 V : 2 x 10 AT
230 — 250 V : 2 x 6.3 AT
2
25 kg
593/320/425 mm closed
748/320/425 mm opened
2,7 bar