Pre Assembly For Ota11 - Nice Ten TN2010 Instrucciones Y Advertencias Para El Instalador

7.8.2) Buffer battery
34
Fit the PS334 below the
TN2010
7.8.3) Pre-assembly for OTA11
Loosen the screws and remove the
38
lateral covers
Insert the cord and spring, as
41
shown
35
Pass the battery cable through
the TEN cable inlet.
Loosen the screws and remove
39
the sleeve
Fix the spring with the 4.2x13
42
screw supplied, re-tighten the
sleeve and insert the sheath.
36
Remove the membrane on the
control unit box
40
43
37
Connect the cable to the bat-
tery connector
Tighten the pin supplied, taking
care to ensure the correct position
with respect to the handle
Pierce the pre-cut element on the
cover and re-close the assembly,
taking care not to crush the seal
GB
29