14 7.8.1 Pre Assembly For Ota11 - Nice Ten TNKCE Instrucciones Y Advertencias Para El Instalador

7.8) Accessories
The following accessories are available with TEN. Refer to the Nice S.p.A. product catalogue for a complete and updated list of the acces-
sories.
TNA1 Spare control unit for TN2030 and TNKCE
OTA2 Support bracket for motor length 1250mm
OTA3 Support bracket for motor length 2000mm
TNA4 Pair of transmission shaft lengths 1500mm
TNA5 Pair of standard straight telescopic arms
TNA6 Pair of standard curved telescopic arms
TNA8 Pair of transmission shaft lengths 200 mm
OTA11 Kit for external release by means of metal cord
OTA12 Kit for external release by means key operated catch
TNA38 Gear device for 1 pair of transmission shafts
TS Warning sign table
7.8.1) Pre assembly for OTA11
42
Loosen the screws and remove the lateral covers
Tighten the pin supplied, taking care to ensure the correct
44
position with respect to the handle
Fix the spring with the 4.2x13 screw supplied, re-tighten
46
the sleeve and insert the sheath.
24
43
Loosen the screws and remove the sleeve
45
Insert the cord and spring, as shown
Pierce the pre-cut element on the cover and re-close the
47
assembly, taking care not to crush the seal.