Instructions And Warnings For Ten Gearmotor Users - Nice Ten TN2010 Instrucciones Y Advertencias Para El Instalador

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 130

Instructions and warnings for TEN gearmotor users

Important safety instructions
!
Warning: for personal safety it is important to observe these instructions
Keep these instructions in a safe place
These instructions can integrate the "Automation use instructions and warnings" to be delivered by the installer to the automation owner, and in any event must be integrated with this document.
Congratulations on your purchase of a Nice automa-
tion. Nice S.p.a. produces components for the automation
of gates, doors, shutters, rolling shutters and sun
awnings: gearmotors, control units, radio controls, flash-
ing lights, photocells and accessories. Nice uses exclu-
sively top quality materials and processes, and by voca-
tion researches into the most innovative solutions to
ensure the utmost simplicity of equipment use, with spe-
cial attention to technical solutions, aesthetics and
ergonomics: given the vast range of Nice products, your
installer will certainly find the ideal product for your require-
ments. However, Nice is not the manufacturer of your
automation, which is the result of careful analysis, assess-
ment, choice of materials and the set-up of a system by
your entrusted installer. Each automation is unique, and
only your installer has the experience and professional
skills needed to obtain the system that meets your require-
ments, is safe and reliable over time, and is above all to
professional standards, i.e. compliant with all relevant cur-
rent standards. An automated system is a real commodi-
ty, as well as a valid safety system and, with just a little
attention, can last for years. Even if the automation in your
possession meets the safety levels established by stan-
dards, this does not exclude possible residual risks, i.e.
the possibility that hazardous situations may be generat-
ed, usually due to inadvertent or incorrect use, and for this
reason we provide some advice on procedures to avoid
any inconvenience.
• Before using the automation for the first time,
ensure that the installer explains the sources of residual
risks, and take care to read the instruction manual
and safety warnings for the user provided by the
installer. Keep the manual for consultation when in doubt
and ensure supply to new owners of the automation.
• Photocells do not constitute actual safety
devices, but safety aids. They are designed using
highly reliable technology, but in extreme conditions may
be subject to malfunctions or potential faults, and in cer-
tain cases these faults are not immediately evident.
For this reason, it is good practice to observe the fol-
lowing:
- Transit is admitted only if the gate or door is complete-
ly open with the leafs stationary
- Transit while the gate or door is closing is STRICTLY
PROHIBITED!
Periodically check correct operation of the photocells
and perform the scheduled maintenance at least every
six months.
• Your automation is a machine that performs
commands imparted by the user; negligent or
improper use may constitute a hazard: never activate
automation controls if persons, animals or objects are
present in the operating range
• Children: an automation system guarantees a high
level of safety, using special detection devices to pre-
vent movement in the presence of persons or objects,
thereby guaranteeing constant foreseeable and safe
activation. However, it is advisable to ensure that chil-
dren do not play in the vicinity of the automation to
avoid inadvertent activation, and remote controls
should always be kept out of reach. it is not a toy!
• Check the system frequently, in particular all
cables, springs and supports to detect possible imbal-
ance, signs of wear or damage. Check monthly that the
drive motor inverts when the door touches an object
with a height of 50 mm from the ground. Do not use the
automation if repairs or adjustments are required; any
fault with the installation or an incorrectly balanced door
may lead to physical injury.
• Malfunctions: If any anomalous condition is noted on
the automation, disconnect the power supply from the
system immediately and activate the manual release.
Never attempt to repair the automation alone; contact
your local installer for assistance: in the meantime the
system can be used in manual mode, after releasing the
gearmotor as described below.
• Maintenance: As with all machinery, the automation
requires periodic maintenance to ensure optimal opera-
tion, extended lifetime and complete safety. Arrange
with your local installer to draw up a periodic mainte-
nance schedule; Nice recommends maintenance every
6 months in the case of normal domestic use, but this
interval may vary according to the intensity of use.
Checks, maintenance and repairs must be performed
exclusively by qualified personnel.
• Even if you possess the skills, never modify the system
or automation programming and adjustment parame-
ters: your installer is exclusively responsible for these
operations.
• Testing, periodic maintenance and any repairs must be
documented by the person performing the operations
and the relative documents must be kept by the system
owner.
The only operations that can be performed by the
user, and recommended by the manufacturer, are
cleaning of the photocell lenses and removal of any
leaves or stones that may obstruct the automation. To
prevent persons from activating the door, before pro-
ceeding, remember to release the automation (as
described below), disconnect all power sources
(including the buffer batteries if fitted) and use exclu-
sively a cloth slightly dampened with water for cleaning
• Disposal: At the end of the automation's lifetime,
ensure that it is disposed by qualified personnel and
that the materials are recycled or scrapped according
to current standards in the place of use.
• In the event of breakage or power supply fail-
ure: While awaiting arrival of your installer, or the return
of power, the automation can be activated like a normal
manual door. To enable this, the manual release must
be operated: this operation has been specifically
researched by Nice to ensure optimal and simple use at
all times, without the need for special tools or physical
strength.
GB
31
Tabla de contenido
loading

Este manual también es adecuado para:

Ten tn2020

Tabla de contenido