Safety In Preparation - Nogueira SILONOG-F Manual De Instrucciones

SAFETY IN THE PREPARATION
ƒ M a k e s u r e t h e m a c h i n e i s
appropriately coupled to the
tractor, and the coupling pin is
properly locked.
ƒ Before you initiate the operation,
perform a machine general check-
up, observing if there are no loose
bolts, worn parts, cracks, leaking,
loose chains etc. Make sure to
always make necessary repairs,
paying attention to instructions in
this manual.
ƒ When you uncouple the machine
from the tractor, choose a
flat surface, in order to ease
the procedure and the follow
coupling. Make sure the machine
is stationary and, if necessary, add
shims to the wheels.
ƒ Be especially careful when you
couple and uncouple the machine
to the tractor. Observe if the
coupling pins are securely locked.
Always make use of counter
pins to avoid that pins loosen
accidentally.
ƒ In order to provide a better
understanding, certain images
or pictures are presented without
their safety protections. However,
the machine can never be used
without them. Before you turn
the machine on, check if all the
protections are in place.
ƒ Fix the edges from the cardan
shaft protection covers in fixed
points of the tractor and the
implement, through specific
chains for this purpose, so that they remain
static, without rotating. Never use the cardan
shafts without their protection covers.
Instructions Manual
7