Uncoupling; Transportation When Coupled To A Tractor - Nogueira SILONOG-F Manual De Instrucciones

B
C

UNCOUPLING

Choose a flat and leveled surface to park the
Bagger. In case this is not possible, you must add
shims to the wheels to ensure that the machine is
completely stationary.
1.
Uncouple the hoses of the valves from the
tractor's remote control.
2.
Unlock the jack and lower it to the ground.
3.
Using the jack, lift the hitch a little, until you
soften the weight over the tractor's drawbar.
4.
Remove the lock (C) and the coupling pin (B).
5.
Move the tractor, so that it is uncoupled from
the machine.
D
TRANSPORTATION WHEN COUPLED TO
THE TRACTOR
Transportation of the machine while it is coupled
to the tractor must not be done on public roads
and highways. This practice must be limited to
properties and rural areas. Check the Department
of Transportation on the rules and applicable laws
in your region, as well as the existing possibility of
transporting the machine with the tractor on certain
parts of roads. Ask for guidance, authorization and
procedures in writing.
When you transport the Bagger coupled, put the
conveyor belt in the transportation position.
IMPORTANT!
ƒ Never allow the presence of people near the
header with coupling adjustment or onto any parts
of the machine during transportation.
ƒ Remember to release the brakes from the Bagger
before you start moving.
ƒ Do not manoeuver when the cardan shaft is
coupled and the PTO is on.
Instructions Manual
19