Troubleshoothing - VOX electronics BBM - 4406 Manual De Usuario

TROUBLESHOOTHING

Problem
Smoke comes out of
the baking
compartment or of
the vents
The
down in the middle
and is moist on the
bottom
Questions
It is difficult to take
&Answers
the bread out of the
on Bread
baking pan.
maker
The ingredients are
not mixed or the
bread is not baked
correctly
The appliance does
not
display shows HHH
The bread rises too
fast
Error with
The bread does not
the recipes rise at all or not
enough
The dough rises too
much and spills over
the baking pan
The
down in the middle
Cause
The ingredients stick to the
baking compartment or on the
outside of the baking pan
bread goes The bread is left too long in the
pan after baking and warming.
The bottom of the loaf is stuck to
the kneading blade
Incorrect program setting
The START/STOP button was
touched while the machine was
working
The lid opened several times
while the machine was working
Long blackout while the machine
The rotation of the kneading
The appliance is still hot after the
start. The previous baking procedure
too much yeast, too much flour,
not enough salt
or several of these causes
No yeast at all or too little
old or stale yeast
liquid too hot
the yeast has come into contact
with the liquid
wrong flour type or stale flour
too much or not enough liquid
not enough sugar
If the water is too soft the yeast
ferments more
too much
fermentation of the yeast
bread goes The dough volume is larger than
the pan and the bread goes down.
was working
blade is blocked
milk affects the
Solution
Pull out the plug and clean
the outside of the baking pan
or the baking compartment.
Take the bread out of the
baking pan before
warming function is over.
Clean the kneading blade and
shafts after the baking. If
necessary, fill the baking pan
with warm water for 30
minutes, then the kneading
blade can be easily removed
and cleaned.
Check the selected menu and
the other settings.
Do not use the ingredients
and start over again
Never open the lid frequently,
otherwise it is necessary,
such as add ingredients. And
make sure that lid was closed
well after being opened.
Do not use the ingredients
and start over again.
Check that the kneading
blade is blocked by grains,
etc. Pull out the baking pan
and check whether
drivers turn. If this is not the
case, send the appliance to
the customer service.
Pull out the plug, take out the
baking pan and leave it to
cool at room temperature.
then insert the plug and start
again.
a/b
a/b
e
c
d
e
a/b/g
a/b
f
c
a/f
the
the