Using Infant Carrier With The Base; Attaching Infant Carrier To Base; Releasing Infant Carrier From Base - CYBEX ATON Manual Del Propietário

Attaching Infant Carrier to Base

1. Make sure handle is LOCKED in the CARRY POSITION.
2. Lift Infant Carrier by the Handle and
slide the Attachment Rod under the
Attachment Catch on the Base.
3. Rotate foot end of the Infant Carrier down onto
the Base until an audible CLICK is heard.
The GREEN Safety Button will pop out from the
middle of the Infant Carrier Release to indicate
proper attachment.
ALWAYS lift up on the Carry Handle to verify that the
Infant Carrier is securely attached to the Base.
The Carry Handle MUST remain in the CARRY
POSITION when using this child restraint in a vehicle.

Releasing Infant Carrier from Base

1. Press GREEN Safety Button in while pushing
the Infant Carrier Release down.
2. Slightly tilt Infant Carrier toward front of vehicle.
Grasp Infant Carrier with both hands to lift off.
28

Using Infant Carrier with the Base