Adjusting The Harness Height - CYBEX ATON Manual Del Propietário

Adjusting the Harness Height

For proper use of the Infant Carrier, the Harness shoulder
straps MUST be at the correct height for your child.
1. Place child in Infant Carrier making sure their bottom
is in the seat, and their back is fully supported.
2. Identify the CLOSEST Harness Strap Slots that
are AT or BELOW
3. Remove child and turn Infant Carrier over
to locate the Splitter Plate. Unhook one
Shoulder Strap from the Splitter Plate.
Only adjust one strap at a time to have the other
strap for reference.
4. From the front, pull the strap out of the slot,
Seat Cover, and Infant Insert (if used).
5. Re-thread through the Infant Insert (if used),
Seat Cover and correct Harness Slot.
6. Reattach strap to the Splitter Plate
and repeat for the other strap.
7. Check that Harness is free from twists and that
it can be tightened and loosened easily.
NEVER remove Harness or Harness components from
Infant Carrier.
DO NOT USE child restraint if any part of the Harness
is damaged.
Periodically check for proper shoulder strap height as
your child grows.
Using the Infant Carrier
your child's shoulders.
13