Redmond RMC-151E Manual Del Usuario página 8

To adjust the cooking temperature:
1. Press and hold down the "Time Delay" button during the cooking pro-
gramme operation. Press the "Menu" button during the cooking programme
operation. The temperature value indicator will start flashing.
2. Adjust the desired temperature. To increase the value press the "+" button,
to reduce the value — the "–" button. Press and hold down the correspond-
ing button to scroll through the digits.
3. Do not press the buttons on the control panel for 10 seconds. The adjust-
ments will be automatically saved.
To adjust the cooking time:
During the cooking programme operation press and hold down the "Time Delay"
button for several seconds. Press the "Time/Temp." button to switch to the time
adjustment. The minute value indicator will start flashing.
Press the "Hour/Min" button to select the hour or minute adjustment. The se-
lected value will be flashing.
Press the "+" button to increase the value, and the "–" button to reduce the value.
Press and hold down the corresponding button down to scroll through the digits.
Press the "Hour/Min" button to select the hour or minute adjustment. The se-
lected value will start flashing.
Do not press the buttons on the control panel for 10 seconds. The adjustments
will be automatically saved.
After saving the adjustments the temperature and remaining time values will
be displayed by turn.
In case of adjusting the cooking time value to 00:00, the programme operation
stops.
To save the adjusted cooking programme
You can save the new programme instead of the default programme for 3
minutes after the end of programme operation if desired. The programme
countdown will be displayed (in 1-second increments).
Press and hold down the "+" and "–" buttons to save the adjusted cooking pro-
gramme.
Press "Cancel/Reheat" to access the menu without saving.
The reproduction of the adjusted cooking programme
When selecting the adjusted programme in the menu the "----" symbol instead
of the cooking time will be displayed.
You can adjust the time of delay or immediately start the adjusted programme
by pressing and holding the "Start / Keep Warm" button for several seconds.
During the operation of the adjusted programme the remaining cooking time,
selected temperature will be displayed by turns. Double signal will be heard
after passing every point of adjustments.
It is impossible to adjust the settings of the saved programmes.
Restoring the default settings
You can restore the default settings of one or all the adjusted programmes at
any time. To do so select the adjusted programme in the menu and simultane-
ously press and hold down the "Hour/Min" and "Time Delay" buttons for sev-
eral seconds. The adjustments will be cleared.
After restoring the adjusted programme the original default programme is
displayed in the menu.
To clear all the adjusted programmes and return to the default settings press
and hold down the "Hour/Min" and "Time Delay" buttons in the standby mode.
Standard Operating Procedure for Automatic Programmes
1. Prepare (measure) the ingredients.
2. Fill the multicooker bowl with the ingredients according to the cooking
programme and position it inside the appliance. Ensure that all the ingre-
dients, including liquid are evenly distributed below the maximum fill
8
mark on the inner wall of the bowl. Ensure that the bowl is properly fixed
and makes full contact with the heating element.
3. Close the main lid until it clicks into place. Plug in the appliance. Turn the
power switch "0/I" to "I" position.
4. Press "Menu" to leave the standby mode. Select the required cooking
programme, using the "+", "–" or "Menu" buttons (the corresponding indica-
tor will be flashing).
5. If you are not satisfied with the default cooking time, press "Time/Temp."
and adjust this value.
You can adjust the cooking temperature in the "MULTICOOK" and "DEEP FRY"
programmes. After adjusting the cooking time, repress the "Time/Temp." button
and adjust the desired value using the "+" and "–" buttons. After adjusting the
temperature, press the "Time/Temp." or "Time Delay" buttons to return to the
cooking time adjustment or switch to the "Time Delay" adjustment.
6. Adjust the time of delay if necessary.
7. Press and hold down the "Start / Keep Warm" button to start the cooking
programme. Depending on the selected programme the countdown will
start immediately after pressing the "Start / Keep Warm" button or upon
reaching the required temperature in the bowl.
Keep Warm may be disabled in advance if necessary.
8. An audible signal will be heard at the end of the programme. Further,
depending on the selected programme or the current settings the appli-
ance will switch to the Keep Warm or standby mode.
9. To cancel the entered programme, interrupt the cooking process or Keep
Warm press and hold down the "Cancel/Reheat" button for several seconds.
"MULTICOOK" programme
The programme is recommended for cooking dishes with cooking time and
temperature parameters, adjusted by the user. Thanks to the "MULTICOOK"
programme the REDMOND RMC-151Е multicooker may substitute the variety
of kitchen appliances and allows cooking food on any recipes, found in the
family cookbook or taken from the Internet.
The default cooking time is 30 minutes; cooking temperature is 100°С.
The temperature can be manually adjusted between 35°С and 180°С in 5°С
intervals.
The time can be manually adjusted between 2 minutes and 15 hours in 1
minute interval (for intervals up to 1 hour) or 5-minute intervals (for intervals
more than 1 hour).
An audible signal will be heard upon reaching the desired cooking temperature.
In the "MULTICOOK" programme if the temperature is adjusted to 80°С or less,
the Keep Warm function will be automatically disabled. It may be manually
enabled if necessary.
"COOK" programme
The programme is recommended for cooking vegetables and beans. The default
cooking time is 40 minutes.
The time can be manually adjusted between 5 minutes and 8 hours in 5 minute
intervals.
"EXPRESS" programme
The programme is recommended for cooking rice, fluffy water porridge and
quick reheating of ready meals.
The time adjustment, Time Delay and Keep Warm functions are not applicable
for this programme.
"STEW" programme
The programme is recommended for making roast meat, ragout, stewed meat,
poultry, vegetables and multicomponent dishes. The default cooking time of
the program is 1 hour. The time can be manually adjusted between 5 minutes
and 12 hours in 5-minute intervals.
"PIZZA" programme
The programme is recommended for making pizza with meat, poultry, cheese
and other stuffing. The default cooking time is 25 minutes. The time can be
manually adjusted between 10 minutes and 8 hours in 5-minute intervals.
"PORRIDGE" programme
The programme is recommended for cooking porridge using low fat pasteurized
milk. The default cooking time of the programme is 20 minutes.
The time can be adjusted between 5 minutes and 4 hours in 1 minute intervals
(for intervals up to 1 hour) or in 5-minute intervals (for intervals more than 1
hour).
For the best results and in order to prevent milk from boiling away, we recom-
mend you to do the following:
• rinse grain (rice, buckwheat, millet, etc.) thoroughly until water runs clear;
• butter the bowl before cooking;
• follow proportions suggested in the recipe book, increase or reduce amount
of ingredients proportionately;
• using whole milk dilute it by half with water.
Cooking results may vary depending on the manufacturer and place of origin
of grain and milk.
If you fail to achieve the desired result in the "PORRIDGE" programme use the
versatile "MULTICOOK" programme. The optimal cooking temperature for milk
porridge is 95°С. The quantity of ingredients and cooking time should be
adjusted according the recipe.
"SOUP" programme
The programme is recommended for cooking broths, different types of soup.
The default cooking time of the programme is 1 hour. The time can be ad-
justed between 10 minutes and 8 hours in 5-minute intervals.
"RICE" programme
The programme is recommended for cooking rice and also fluffy water porridge.
The default cooking time in this programme is 30 minutes. The time can be
manually adjusted between 5 minutes and 4 hours in 1 minute intervals.
"GRAIN" programme
The programme is recommended for cooking different kinds of grain, side
dishes and also fluffy water porridge. The default cooking time of the programme
is 30 minutes.The time can be manually adjusted between 5 minutes and 4
hours in 1 minute intervals.
"SAUCE" programme
The programme is recommended for making different kinds of sauce, preserve
and jam. The default cooking time in this programme is 35 minutes. The time
can be manually adjusted between 5 minutes and 2 hours in 5-minute intervals.
It is possible to cook with an open lid.
"SELF-CLEAN" programme
The programme is recommended for automatic cleaning of the multicooker
bowl and inner removable lid. The default cooking time in this programme is
30 minutes. The time can be manually adjusted between 5 minutes and 2 hours
in 5-minute intervals.
"FRY" programme
The programme is recommended for frying vegetables, meat, fish and poultry.
It is recommended to fry the products with an open lid. The default cooking
time in this programme is 15 minutes. The time can be manually adjusted
between 5 minutes and 2 hours in 1 minute intervals. The Time Delay function
is not applicable for this programme.
To avoid burning of ingredients we strongly recommend you to follow the tips
from the cookbook and stir food occasionally. Let the appliance completely
cool down before reusing the "FRY" programme.