Oven Preparation; General Rules To Bake On Refractory Surfaces; General Rules To Bake In Baking-Tin; Oven Starting - OEM SUPER TOP Manual De Uso

5.12 - OVEN PREPARATION

Pizza can be baked as follows: either directly on the
refractory surface or in the baking tin.
Following a few information on the adjustment of the
different parameters, however for more detailed informa-
tion, refer to the paragraph "Pizza cooking".
IMPORTANT
The information reported in the table shall
be followed until the user's experience al-
lows the user to personally set time and
temperatures.
5.12.a General rules to bake on refractory sur-
faces
• Start the oven at least one hour and fifteen minutes
before working and set following parameters:
• Programme 1 - cooking directly on the refractory
stone for piazzas Ø 30 or Ø 35 cm.
• Programme 2 - cooking directly on the refractory
stone for piazzas Ø 45 or Ø 50 cm.
• Programme 3 - pizza in a baking tin.
ATTENTION
• Do not salt the refractory surface, do not
make the surface cool using a wet cloth
(the cloth shall be moistened with cold
water), only use pizza dough; in this way,
a refractory surface wear does not occur
and pizza can correctly be baked, as well.
5.12.b General rules to bake in baking-tin
• Start the oven at least one hour and fifteen minutes
before working and set following parameters:
Working temperature 300°C
Ceiling resistance 50%
Bedplate resistance 60%
Chimney closed "0".
EN - 32
5.12.c - Oven starting
• In case the oven has been set with a weekly starting
programming, at the set time it starts with the value of
the various parameters belonging to the programme
selected in the weekly programming phase.
If weekly scheduling was not set, press button
• The oven turns on with the last set program, if the
program needs to be changed, select the desired
program "P1", "P2", "P3".
- When the oven turns on, the icons "
flash, indicating that the oven is heating up and there-
fore the chimney remains closed and the extractor is
stopped.
When the baking temperature is reached the two
icons stop flashing and will start automatically with
the settings pertaining to the selected program.
IMPORTANT
The start-up/positioning of the chimney and
the extractor can be forced by moving to
the icon and pressing the knob.
• Wait, until the oven reaches the temperature set for
baking the pizza.
SUPER TOP
Functioning
.
" and " "