GE ZEK938 Manual Del Propietário página 40

Care and Cleaning
Wall Oven
O?)eTz
light
bulbs
I-4,WARNING I
SHOCK OR BURN HA7A RD: B(_b_ _e[)lacir_g" over_
l_'ht bull), (tisconr_ect tlu_elecO'ical power to the (nJer_
at the main fi_.s_ or circuit &eaker pored, b)dlu_e to do
so mrO, _vsu# in elecO'icshock or burr_.
I CAUTION
BURN HAZARD." The glass cover arm bulb should
be _'emoved wher_ cool. 7buch@g hot glass with ba_'_
hcmds or a damp cloth <cm <a_se burns.
To remove:
1 Turn file glass cover counterclockwise 1/4 mrn
until the tabs of the glass cover clear the grooves
of the socket. Wearing lamx gloves ma? offer a
better grip.
2 Using gloves or a dry cloth, remove the bulb
by pulling it straight out.
To replace:
1 Use a new 120/130-volt hMogen bulb, not to
exceed 50 watts. Replace the bulb with the same
type of bulb that was removed. Your model will
have one of the two types shown on the fight.
To detemline tile correct replacement bulb,
check the bulb terminals. Bulbs with 2 straight
pin temlinals are (;6.35 bulbs. Bulbs with
2 looped terminals are (;9 bulbs. (Do not
interchange.) Be sure the replacement bulb
is mmd 120 volts or 130 volts (NOT 12 volts).
Using gloves or a @Y clod1, remove file bulb
flom its packaging. Do not touch the bulb with
bare f'mgers. Oil flom skin will damage the bulb
and shormn its life.
3
4
Push tile bulb straight into tile receptacle aH
tile way.
Place the robs of tlle glass cover into die grooves
of the socket. Turn tile glass cover clockwise
1/4 turn.
For improved lighting inside die oven, clean
the glass cover f}equendy using a wet cloth.
This should be done when the oven is
compleml) cool
5 Reconnect electrical power to the oven.
Receptacle
Socket
i i
i i
i i
i i
5_
, -G6.35 Bulb
i
i
Tab
Glasscover
(onsomemodels)
Receptacle Socket
i i
i
i i
_G9 Bulb
i
i
i
i
i
i
Tab
(on somemodels)
jQ
Receptacle
Usegloves
or ctoth
Probe
40
The temperature probe may be cleaned widl soap
and water or a soal>filled scouting pad. Cool the
mmperamre probe before cleaning. Scour
stubborn spots with a soaf>filled
scouring pad,
rinse and dry.
Do not imm_'se the tempemtmv probe in water:
Do not stormthe temperatuw probe in the oven.